background image

TITAN TILE CUTTER 500W               TTB336TCB

GUARANTEE

This             product carries a guarantee of 24 months. If your product develops a 
fault within this period, you should,in the first instance contact the retailer where 
the item was purchased.

This guarantee specifically excludes losses caused due to:
- Fair wear and tear
- Misuse or abuse
- Lack of routine maintenance
- Failure of consumable items (such as batteries)
- Accidental damage
- Cosmetic damage
- Failure to follow manufacturer’s guidelines
- Loss of use of the goods

This guarantee does not affect your statutory rights. This guarantee is only valid
in the UK.

For further technical advice, spare parts or repair service (outside of guarantee) 
please contact your retailer quoting your Titan model number.

Congratulations on your purchase of a            power tool from Titan Power

Tools (UK) Ltd. We want you to continue getting the best performance from

it so this handbook includes information on safety, handling and care. 

Please retain this handbook in case you need to refer to any of the information 

in the future.

Your            power tool comes with a 24-month guarantee, so should it 

develop a fault within this period contact your retailer.

Summary of Contents for TTB336TCB




















Reviews: