background image

Congratulations on your purchase of a             power tool from Titan Power Tools 

(UK) Ltd. We want you to continue getting the best performance from it so this 

handbook includes information on safety, handling and care. Please retain this 

handbook in case you need to refer to any of the information in the future.

Your             power tool comes with a 2 year guarantee, so should it develop a 

fault within this period contact your retailer.

GUARANTEE

This                product carries a guarantee 2 years. If your product develops a fault within this 

period, you should, in the first instance contact the retailer where the item was purchased.

This guarantee specifically excludes losses caused due to:

- Fair wear and tear

- Misuse or abuse

- Lack of routine maintenance

- Failure of consumable items (such as batteries)

- Accidental dammage

- Cosmetic damage

- Failure to follow manufacturer’s guidelines

- Loss of use of the goods

This guarantee does not affect your statutory rights. This guarantee is only valid in the UK.

For any enquiries relating to the guarantee please refer to your retailer.

Summary of Contents for TTB281GRD



















Reviews: