3
www.titan-‐appliances.com
Electrical
♦
Plug the unit into a grounded 3-‐prong outlet. Do not remove grounding prong, do not
use an adapter and do no use an extension cord.
♦
It is recommended that appliance be connected on its own circuit. Use outlets that
cannot be turned off by a switch or a pull chain.
♦
The unit must be installed in accordance with state and local electrical codes.
♦
A standard electrical supply (115 V, 60Hz) that is properly grounded in accordance with
the National Electrical Code and local codes and ordinances is required.
♦
Do not operate the unit with a power plug missing the ground plug, a damaged cord or a
loose socket.
♦
Do not start or stop the unit by switching the circuit's power on and off.
♦
Always turn the unit off and unplug it when cleaning.
♦
Unplug the unit if it is not going to be used for an extended period of time.
♦
Be sure the appliance is properly grounded.
♦
Do not plug or unplug the unit with wet hands.
♦
Do not bypass, cut or remove the grounding plug.
♦
Never repair the unit while it is plugged in.
♦
Unplug the unit immediately if it makes strange sounds, emits smells or smoke.
♦
Do not remove any part of the casing unless instructed by an authorized technician.
♦
Do not attempt to repair or replace any part of the appliance unless it is specifically
instructed in the manual.
♦
Contact customer service if the unit needs service.
Note: Flammable Refrigerant Used! When handling, moving and using the refrigerator: make
sure to avoid either damaging the refrigerant tubing, or increasing the risk of a leak.
