15
www.titan-‐appliances.com
Trouble Shooting
PROBLEM
POSSIBLE CAUSE
SOLUTION
The appliance does not
turn on.
•
There is a power failure.
•
The unit is not plugged in.
•
A house fuse has blown or
the circuit breaker is
tripped.
•
Ensure the power outlet has power.
•
Check and plug the unit in to a power
outlet that has sufficient amperage.
•
Replace the blown fuse or reset the
breaker.
The appliance turns on
and off frequently.
•
The ambient temperature is
too high.
•
The door is being opened
too often.
•
The door is not closed
properly.
•
The door gasket is not
sealing properly.
•
Inadequate ventilation
around the unit.
•
Run the appliance at the appropriate
recommended ambient temperature.
•
Avoid opening the door too frequently.
•
Make sure the door is closed properly.
•
Make sure the door gasket is properly
sealed.
•
Read and observe the ‘Clearance
Requirements’ section of this owner’s
manual
The appliance does not
reach the desired
temperature/The
appliance is not cold
enough.
•
The unit is installed too
close to heat source(s).
•
Inadequate ventilation
around and behind the unit.
•
The door is opened too
frequently or for long
periods of time.
•
Keep the unit away from heat sources, e.g.
direct sunlight.
•
Read and follow the ‘Installation Clearance
Requirements’ section of this manual.
•
Close the door tightly and do not open the
door too frequently or for long periods of
time.
The appliance is making
strange sounds.
•
Some sounds are normal.
•
The unit is not properly
leveled.
•
The unit is touching another
appliance.
•
Read the ‘Sounds’ section.
•
Check to make sure that the unit is leveled.
•
Ensure the unit is not touching another
appliance or furniture.
The body of the
appliance is electrified.
•
The unit is not properly
grounded.
•
Contact your local electrician to test your
electrical grounding system.
Frost is forming in the
appliance.
•
The environment is too
humid.
•
The ambient temperature is
too low.
•
The door is opened too
frequently.
•
This unit has an ‘auto-‐defrost’ system,
however, manual defrosting may still be
required under some conditions. If frost
builds up, try running the cooler at a
warmer temperature setting, minimizing
the number of door openings, or unplug
the unit to defrost.
The door does not shut
properly.
•
The unit is not leveled
properly.
•
The door gasket is dirty.
•
The door gasket is not
installed incorrectly.
•
The shelves are incorrectly
installed.
•
Make sure the cooler is properly leveled
before operating.
•
Clean the door gasket.
•
Make sure the door gasket is properly
installed.
•
Make sure the shelves are installed
correctly – refer to ‘Installing the Door
Handle and Shelve’ Section of this manual.
