Version 2.01 TS132/TS142/TS152 QIG
S
YSTEM RESET
a.
Turn ignition ON
±
OFF
±
ON
±
OFF
±
ON.
b.
Press the valet switch once and release. The parking lights will turn on and the
siren/horn will chirp once.
c.
Press and hold the valet switch on, until the parking lights flash 3 times and the
siren/horn will chirp 3 times, which means the system has reset to factory default
settings.
d.
Turning the ignition key to the off position or 30 seconds of no activity will exit
program mode, indicated by a single long siren/horn chirp.
NOTE: The system reset does not erase transmitter coding, but does reset tach settings.
PROGRAMMING
:
a.
Turn ignition ON
±
OFF
±
ON
±
OFF
±
ON.
b.
Press the valet switch once and release. The parking lights will turn on and the
siren/horn will chirp once.
c.
With the park lights staying on, select a desired Program Menu using the transmitter.
Pressing button 1 on the transmitter will select MENU 1; pressing button 2 will select
MENU 2; pressing button 3 will select MENU 3; pressing button 4 will select MENU
4.The park lights will flash and the siren/horn will chirp once to confirm the selected
menu.
d.
Select Programmable Settings in Sub-Menus (Still in programming mode):
1. Press and release the Valet (Program) Button the correct number of times to select the
desired Sub-Menu. The park lights will flash once each time the programming button is
pressed. The LEDs in the antenna will flash and the siren/horn will chirp to indicate
which Sub-Menu has been selected. For example: 1 LED flash and 1chirp= Sub-Menu
M1-1; 2 LED flashes and 2 chirps= Sub-Menu M1-2; etc.
2. Once the correct Sub-Menu has been selected, press and hold the Program Button until
the park lights flash and the siren/horn chirps to confirm the desired setting. For example:
1 park light flash and 1 chirp= Setting 1; 2 park light flashes and 2 chirps= Setting 2; 3
