LUX ADJUSTMENT
The LUX adjustment located on the bottom of the receiver floodlight wiring box determines at what light level the receiver
floodlight will start operating.
Provisionally turn the LUX control fully clockwise to the moon symbol (dusk) position (FIGURE 14). At this provisional
setting the floodlight remains inactive during daylight. At dusk the floodlight will become active. If this provisional setting
proves to be unsuitable the LUX control should be adjusted. Simply set the LUX control to the position you desire the
floodlight to become active as daylight declines.
TROUBLE SHOOTING
Floodlight does not turn on:
l
Check if the wall switch is turned on.
l
Confirm that you have made the correct wiring
connections.
l
Make sure that the lamp has not burned out.
l
Ensure transmitter is working and within range.
l
Carry out code learning sequence again.
Environmental Concerns:
Please DO NOT dispose of electrical appliances as unsorted waste, use the recycling facilities provided by your local
authorities.
Please DO NOT dispose of packaging as unsorted waste, use the recycling facilities provided by your local authorities.
Page 4 of 4
SPECIFICATIONS
Power Requirement
AC 230/240v 50Hz
TH Lamp Load
Max. 300W TH Halogen Lamp
Additional Lighting Load
1000W Incandescent
Receiver Frequency
433MHz
Mounting Height
Recommended 1.8 - 2.4m
(5.9 - 7.8ft) Solid Wall Mount
Wall Switch Control
On /Off
Learning Key
Code learning, clearance of
memory, manual off
Lux Adjustment
5 - 200 lux
Warm Up Time
Approximately 1 minute
Index of Protection
IP44
Specifications subject to change without notice.
