3
FIGURE 8
Provisionally turn the LUX Control Knob to the edge
clockwise at the moon (dusk) position. (FIGURE 8) In
this provisional setting mode, the Motion Sensor
remains inactive during daylight. At dusk when you
find it is the LUX level you desired for operation,
simply set the LUX control knob to the position that
you tried satisfactorily.
OPERATION
Automatic Operation
When
the
sensor
detects
motion,
the
light
automatically turns on. The built-in photocell turns
the sensor off and on according to the light level
selected by the LUX adjustment.
TROUBLESHOOTING
Light does not turn on
Confirm that you have made a correct “wiring
connection”.
Make sure that the bulbs have not burned out..
Light remains on
Make sure the wiring connection is correct.
Check if the TIME setting is correct.
SPECIFICATIONS
Power Requirement
AC 230V / 50Hz
Lighting Load
Max. 8 A Incandescent or
Max. 6A Fluorescent
Up to 210w LED (dimmable
recommended)
Detection Angle
360
°
MICRODETECTION
Detection Distance
Up to 3.5m radius at 25
°
C at
2.5m Height
MICROMOVEMENT
Up to 5m radius at 25
°
C at
2.5m Height general
movement
Mounting Height
Recommended 2.2 ~ 3m
Ceiling Mount
Wall Switch Control
Auto/Off
Time Adjustment
Approx. 5 seconds to 40
minutes (5, 10, 20, 40, 80,
160 second & 5, 10, 20, 40
minute)
Lux Adjustment
Approx. 30 ~ 200 Lux & test
mode
Warm Up Time
About 1 min
Protection Class
Class II
Protection Degree
IP44
Safety
CE, GS
Specifications are subject to change without notice.
A501111210R
Warning:
Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities.
Contact your local government for information
regarding the collection systems available.
If electrical appliances are disposed of in landfills or
dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging
your health and well-being.