2.6 Do not use the wet hand to touch the electric components
otherwise the created short-circuit will cause personal injury.
2.7 Turn the feed switch button to the （OFF），and turn the
feed control button to（0） when tapping。
2.8 Adjust flow of coolant under the circumstance of stopping.
2.9 Do not wear gloves when operating machine.
2.
10
Machine put on the flat and firmed foundation
which should
be ready a month ago and then level the machine.
2.1
1
When lifting the machine, make sure the lifting device is
reliable; the load of lifting equipment should bigger than the
machine gross weight and the defected lifting tools are
forbidden; lock all handles before lifting and put soft things
between ropes and machine to avoid of damaging the machine
and paintings.
2.1
2
Fix the foundation bolt to prevent machine from inclining.
2.1
3
Make sure machine in good status before operation.
2.1
4
Remove the chips timely when heavy cutting because the hot
chips will catch fire.
2.1
5
Do not touch the coolant with naked hand. To wear the
special gloves avoid of skin allergy.
