T200/2
9
Assembly:
Assembly of the strapping head must be carried out by qualified
technical personnel only.
Anchoring / Fixing:
The measurements and fitting dimensions of the
T200/2
(page 13) are mandatory for
assembly. All measurements required for assembly are provided there.
The strapping head must be fixed at the provided fixing points.
The way of assembly depends on the type of strapping machine into which the
strapping head will be installed.
Before final fixing of the strapping head all transitions at the strap guide channels must
be aligned.
Assembly of the machine:
Electrical wiring of the strapping head must be carried out by qualified technical
personal acc. to the electric circuit diagram.
Laying of the supply cables and connection in the control console/cabinet is carried out
by the customer.
Cabling and cable connection (strapping head
– control console/cabinet) in accordance
with the circuit diagram.
Caution!
Danger of squeezing when assembling the strapping
head!
Attention!
After complete assembly the strapping head must be carefully
checked for proper fixing. Check all fastening bolts for tightness
and retighten, if required.
B 010 - GB 22/10
