Titan SF280E, Safety And Operating Manual

Page: 10 / 13

TROUBLESHOOTING
Although your new sander is really very simple
to operate, if you do experience problems, check
the following:
If your tool can not work, please check the
plug and fuse first.
Sander will not start
Check that there is “mains” at the socket. Check
the connections in the plug; correct and tighten
poor connections.
Check the fuse; replace with correct rating fuse
if suspect.
Sander does not abrade surface
The abrasive paper will only abrade if in good
condition; replace the paper and try again.
The paper must be kept in a dry place; If it is
allowed to become damp, the abrasive particles
will lose their adhesion to the backing paper and
will not abrade.
Sander does not move smoothly
The abrasive paper may be damaged or wrinkled;
catching the paper on sharp corners or edges,
nails or screw heads may tear the paper. Replace
and try again.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your Local Authority or retailer for recycling
advice.