background image

 

19 

 

Warranty  

Titan Post Drivers will warrant to the original purchaser, who purchases the equipment in new condition and in its 
original packaging from an authorized dealer, that its gas-powered post driver will be free from defects in 
workmanship and materials for a period of one (1) year. This warranty period will commence on the date of retail 
purchase by the original purchaser. Titan Post Drivers provides no warranty on the Honda engine. This warranty is 
provided directly by Honda for a period of one (1) year commercial use or two (2) years normal use, and will be 
honored at any local Honda dealer. Both the Titan Post Drivers warranty and the Honda warranty are non-
transferrable beyond the original purchaser.   

• 

To register your Titan Post Driver, go to 

https://www.titanpostdrivers.com/warranty-registration/

 and fill out 

the warranty registration form. 

• 

Warranty shall pertain to parts or service offered by an authorized Titan Post Drivers dealer. Any defective 
part replaced at an authorized Titan Post Drivers location becomes the property of Titan Post Drivers. 

• 

Shipping costs to transport the machine to and from the service center for warranty work will be the 
responsibility of the consumer. 

• 

For warranty claims, contact Titan Post Drivers with proof of purchase date and your serial number. 

Limitations of Warranty  

This limited warranty does not extend to any Titan Post Drivers product which has been misused, abused, or 
improperly maintained, altered, or repaired by an unauthorized person. Nor does this limited warranty cover any 
damage to machine or parts due to faulty installation of parts, faulty operation, or faulty maintenance.  

• 

Damage to components caused by operator error such as dry-fire or misfire will not be considered for 
warranty replacement or service. 

• 

Damage to cosmetic parts caused by rough handling, operator error, or improper storage and handling will 
not be considered for warranty replacement or service. 

• 

Excluded components may need replacement or repair due to normal wear and tear, or lack of proper 
use/maintenance include: 

1.  O-rings and seals 
2.  Lost or stripped fasteners 
3.  Barrel of driver from incorrect use of machine 
4.  Crank pin that is broken from incorrect handling (left-hand thread) 
5.  Titan Post Drivers sleeves/accessories 

Disclaimer of Warranty  

Titan Post Drivers disclaims all liability for any implied warranties. Under no circumstances shall Titan Post Drivers 
be liable for any loss of business, revenues, profit, or indirect, incidental, special, or consequential damages or 
loss arising out of any defect in, or performance of, Titan Post Drivers products, howsoever caused. For warranty 
terms on your Honda GX35 engine, please refer to the separate warranty in the Honda manual provided with your 
post driver.  

Titan Post Drivers is an authorized Honda OEM for use of Honda brand engines on our products. Titan PGD2000 
and PGD3200 post drivers have undergone and passed the testing requirements for the engines to be warranted 
directly by any authorized Honda dealer. You can find a local dealer here: 

http://engines.honda.com/dealer-locator

.  

Summary of Contents for PGD2000

























Reviews: