4
Lift-Rite, 5975 Falbourne Street, Mississauga, Ontario L5R3L8
Tel:
Toll Free from USA: 1-800-558-6012;
Tel:
1-905-456-2603 (Canada and International)
Fax:
1-905-456-1383 Owners Manual, Operating Instructions, and Replacement Parts Manual, Publications Number 1156119A ©2012 Dated 14 Aug 2012
LUBRICATION
All pivot points are equipped with permanently lubricated bushings and bearings. To increase
bearing life, it is recommended that a few drops of light machine oil be applied at each pivot point
every 3 months. The thrust plate is equipped with three grease fittings. Apply grease under normal
conditions every 3 months.
PUSH BAR LINKAGE ADJUSTMENT
If the forks do
not
rise evenly at the tips, or the roller levers begin to drag on the floor, the following
adjustment is necessary:
LCF55 MODEL
• Turn the hand pallet truck over so that the underside of the forks are accessible.
• Remove one split pin (PN-20269B) with 3/16 in. punch.
• Remove pin (PN-20227) from bracket.
• Adjust eyebolts (PN-20226). Turn counterclockwise to raise fork tips and clockwise to lower
fork tips.
• Replace pin (PN-20227) through eyebolt and replace split pin (PN-20269B).
• When adjusted properly, the forks should be 3 in. low height from ground level in the
lowered position.
MAINTENANCE
