Titan 198268, Operator'S Manual

Page: 8 / 33

8
INTRODUCTION
APPLICATION (WCBX62S)
The WCBX62S woodchipper is built by TITAN to reduce unwanted tree limbs into useful
landscape mulch typically found in flower beds, gardens or just about anything you want to help
retain moisture or just to aid in decomposition. It has uses and applications in farming, ranching,
nurseries, campuses, estates, and construction sites.
This woodchipper model is adapted for 3-Point Cat. 1 hitch on 35-65 hp (minimum 45 PTO hp for
maximum capacity) for subcompact tractors with 540 power take–off speed. It should only be
used with power units that meet hitch, weight, and hp requirements shown on page 8. It
features a self-feeding 6” cutting capacity, four reversible and replaceable hardened-steel rotor
knives.
SECTION 1: ASSEMBLY AND SET-UP
TRACTOR REQUIREMENTS (WCBX62S)
Tractor horsepower should be within the range noted below. Tractors outside the horsepower
range must not be used. Must be using a minimum of 45 hp when operating at maximum
capability. The lower 3-Point arms must be stabilized to prevent side to side movement. Most
tractors have sway blocks or adjustable chains for this purpose.
Required Horsepower Range …………………………..… 35 to 65 hp (min 45 PTO hp for max. capacity)
Power Take-off Maximum ……………………………………………………………………….. 540 rpm
Spline Shaft Requirement ..................................................................................... 1 3/8” – 6
Hitch Type…………………………………………………………………………………………………. 3-Point Cat 1
WARNING
To avoid serious injury or death:
Lightweight tractors with rear attached implements may need weights added to the front to
maintain steering control.
Consult your tractor Operator’s Manual to determine proper weight requirements and
maximum weight limitations.