TITAN MODEL KITS 747-8f, Assembly Manual

Page: 4 / 33

I. PARTS PREPARATION
I.A VACFORM PARTS
I.A.1. Remove parts from sheet:
Carefully remove the parts by cutting along the silhouette of the part with a sharp utility knife.
You may find it helpful to mark the cut lines with pencil prior to cutting. Always cut from the
top of the parts, never from the bottom. Multiple shallow passes will always yield a better
result than trying to cut through on a single pass.
.
© Titan Model Kits 4 Revision 1.2 26 Aug 2022