II.B.7. Join the wings
Using scrap plastic, glue up a wing spar and install. The wing spar should be 3.8”
(96.5mm) wide.
*concept is illustrated with a photo from the 777 kit but the procedure is the same here
If you are building your kit WITHOUT the optional landing gear set, then fully assembled wings
can be passed into the fully assembled fuselage and cemented in place by flowing liquid
modeling cement into the joint. If you are building your kit WITH the optional landing gear set
you will need to attach the wings after assembling the fuselage halves. Plenty of time spent
dry-fitting will ensure that this assembly goes smoothly.
© Titan Model Kits
27
Revision 1.2 26 Aug 2022
Summary of Contents for 747-8f
