TPM 053
Version 1.0, May 30, 2017
Page | 2
INTRODUCTION
Gateway Installation and Operation Manual
INTRODUCTION
This manual provides information specific to the Titan Gateway (hereafter referred to as the Gateway)
only.
This manual describes the operation and maintenance of the Gateway together with the TD80 and
Finch II systems. For complete installation and programming details on the TD80 Level Gauging System,
refer the TD80 product manual, TPM 001 and Finch II product manual, TPM 010.
Installation and operational information pertaining to optional equipment or peripheral systems will not
be included in this manual. Refer to the vendor supplied documents for more information.
This guide is intended to assist the user on the installation, use, and maintenance, of the Titan Gateway,
under normal working conditions. Operations outside the scope of this guide or specialized installations
will require further documentation. Please contact your nearest Titan Logix service facility with your
requirements.
It is essential that this manual be read and understood for proper installation and operation of your new
Gateway system.
W
ARRANTY
Please see our Terms and Conditions for details about our product warranty.
There are no serviceable parts in this device. A violated warranty seal will render any warranty null and
void.
D
ISCLAIMER
The information in this document is subject to change without notice. Titan Logix Corp. makes no
representations or warranties with respect to the contents hereof.
P
ROPRIETARY
I
NFORMATION
The Information disclosed herein contains proprietary rights of Titan Logix Corp. Neither this document
nor the information disclosed herein shall be reproduced or transferred to other documents, or used or
disclosed to others for manufacturing purposes, or for any other purpose except as specifically
authorized in writing by Titan Logix Corp.