Eos
®
2 – Digital Humidity
Controller Overview
The Titan Controls
®
Eos
®
2 Digital Humidity controller is a simple to operate. It can be used
to either humidify or dehumidify your growing environment. The adjustment knobs and built in
photocell allow you to easily set day and night humidity levels. A range of 20% to 90% covers
the sweet spot for your plants and allows for optimum growing conditions.
Instructions for Operation
Before using this unit you must decide if this controller will be used with a humidifier or a
dehumidifier, and program the controller accordingly. Ensure the controller is powered on before
setting the mode.
Dehumidify Mode
Use this mode if you are connecting a dehumidifier which will lower the humidity level. Rotate
both Day and Night knobs fully COUNTERCLOCKWISE.
After several moments the LEDs
on the front of the controller will start to flash. Once they stop flashing the Dehumidify LED
should remain on, and the others will turn off. This indicates the controller has been set to
Dehumidify-Mode.
Humidify Mode
Use this mode if you are connecting a humidifier which will increase the humidity level. Rotate
both Day and Night knobs fully CLOCKWISE.
After several moments the LEDs on the front
of the controller will start to flash. Once they stop flashing the Humidify LED should remain on,
and the others will turn off. This indicates the controller has been set to Humidify-Mode.
Changing the Humidity Levels:
Once the mode of operation has been set, you may now set the Day and Night humidity levels
using the knobs. The built-in photocell will detect the ambient lighting level and activate the
Day/Night modes appropriately. After adjusting the settings, if the humidity level rises above or
below the set points (depending on whether humidifying or dehumidifying), the controller will
activate the connected device, and that device will remain on until the humidity level is raised
or lowered by 5% rH above or below the set points. For example, if you are using the controller
with a dehumidifier and the Day humidity setting is 80% if the humidity rises above 80% and if
the controller will activate the dehumidifier and it will remain on until the humidity lowers to 75%.
When using a dehumidifier the set points indicate the maximum humidity level. When using a
humidifier the set points indicate the minimum humidity level.
NOTE: Whenever the connected device is activated, the ‘Output On’ LED will
illuminate.
Warranty Information
• Titan Controls
®
warrants the original purchase of this product against defects in material and
workmanship under normal use for three (3) years from the date of purchase.
• During the warranty period, Titan Controls
®
will, at our option, and without charge, repair or
replace this product if the controller or any of its components fail or malfunction.
• All returns or repairs must be accompanied by a Return Merchandise Authorization (RMA)
number prior to any service of the product.
• This warranty is expressly in lieu of all other warranties, expressed or implied, including the
warranties of merchantability and fitness for use and of all other obligations or liabilities on the
part of the seller.
• This warranty shall not apply to this product or any part thereof which had been damaged by
accident, abuse, misuse, modification, negligence, alteration or misapplication.
• Controllers with serial numbers or date tags that have been removed, altered or obliterated;
broken seals or that show evidence of tampering; mismatched serial numbers or nonconforming
parts, are excluded from coverage.
• Titan Controls
®
makes no warranty whatsoever in respect to accessories or parts not
supplied by Titan Controls
®
.
• Monetary refunds of the warranty will not be given.
• The Buyer assumes all responsibility regarding the use & installation of this controller.
• All warranty service is provided through the factory or an authorized service representative.
• This warranty shall apply only to the United States, including Alaska, Hawaii and territories of the
United States.
• Defective controllers need to be returned with the “proof of purchase/receipt”.
• For additional warranty information, contact a Titan Controls
®
Technical Service Representative
or your Dealer.
NOTE: Titan Controls
®
is a manufacturer of environmental controls. All sales offerings
to the public are done through a nationwide group of Dealers. No sales offerings will be
made directly to the general public.
Service and Repair Program
• For all service and repairs please contact one of our Technical Service Representatives for a
Return Merchandise Authorization (RMA) number.
• All factory service & repairs will be completed within 48 hours of receipt of controller and after
authorization by customer for repairs.
• Titan Controls
®
will, at its discretion, repair or replace the controller.
• Factory calibration services are available for all Titan Controls
®
.
• Returning Units: Please contact your retail store for returns.
6
3
