5
ASSEMBLY INSTRUCTIONS
STEP 1: ATTACH SUPPORT LEGS
1.
Attach front support leg (#2) to the main cross beam (#10) using hex bolt M12x100 (#4),
flat washer Ø12 (#5) and nylon lock nut M12 (#6), loosely tighten the nut.
2.
On the other side of the main cross beam (10) attach the rear support leg (#19) using hex
bolt M12x90 (#18), flat washer Ø12 (#5) and nylon lock nut M12 (#6), loosely tighten the
nut.
3.
Connect the front support leg (#2) and rear support leg (#19) to the bottom of the main
cross beam (10) using hex bolt M12x90 (#18), flat washer Ø12 (#5) and nylon lock nut
M12 (#6), tighten all the nuts.
4.
Tighten all hardware.
STEP 2: ATTACH BEAM ASSEMBLY
1. Attach the beam assembly (#20) to the front support
leg (#2) with the hitch pin (#3) and R-Pin
(#1), lower beam and secure with safety pin (#11).