4
•
Practice Safe Maintenance
•
Understand procedure before doing work. Use proper tools and equipment; refer to Operator’s
Manual for additional information.
•
Work in a clean, dry area
•
Lower the implement to the ground, put the tractor in park, turn off the engine, and remove the key
before maintenance.
•
Allow implement to cool completely.
•
Do not grease or oil implement while it is in operation.
•
Inspect all parts. Make sure details are in good condition and installed correctly.
•
Remove the buildup of grease, oil, or debris.
•
Remove all tools and unused parts from implementation before operation.
PREPARE FOR EMERGENCIES
•
Be prepared if a fire starts.
•
Keep a first aid kit and fire extinguisher handy
•
Keep emergency numbers for doctor, ambulance, hospital, and fire department near the phone.
WEAR PROTECTIVE EQUIPMENT
•
Wear protective clothing and equipment appropriate for the job. Avoid loose-fitting clothing.
•
Prolonged exposure to loud noise can cause hearing impairment or hearing loss. Wear suitable
hearing protection such as earmuffs or earplugs.
•
Operating equipment safety requires the full attention of the operator. Avoid wearing radio
headphones while operating machinery.
AVOID HIGH-PRESSURE FLUIDS HAZARD
•
Escaping fluid under pressure can penetrate the skin causing severe injury.
•
Avoid the hazard by relieving pressure before disconnecting hydraulic lines or performing work on
the system.
•
Ensure all hydraulic fluid connections are tight and all hydraulic hoses and lines are in good condition
before applying pressure to the system.
•
Use a piece of paper or cardboard, NOT BODY PARTS, to check for suspected leaks.
•
Wear protective gloves and safety glasses or goggles when working with hydraulic systems.
•
If an accident occurs, see a doctor immediately. Remember, any fluid injected into the skin must be
treated within a few hours, or gangrene may result
TIRE SAFETY
•
Tire changing can be dangerous, and trained personnel should be the only ones using correct tools
and equipment.
•
When inflating tires, use a clip-on chuck and extension hose long enough to allow you to stand to one
side and NOT in front of or over the tire assembly. Use a safety cage if available.
•
When removing and installing wheels, use wheel handling equipment adequate for the weight
involved.
•
Summary of Contents for 191587
Page 41: ...41 STANDARD SERIES ROTARY CUTTER PARTS LIST...
Page 42: ...42 STANDARD SERIES ROTARY CUTTER PARTS LIST...
Page 43: ...43...
