4
Electro-Pneumatic Positioner
TS600 Series
tissin
1
Introduction
1.1
General information for the user
This instruction includes installation, operation, maintenance, and parts information for Tissin
TS600 Valve Positioner. Keep these instructions in a location which is easily accessible to
every user and make these instructions available to every new owner of the device.
Installation, commissioning and maintenance of the product may only be performed by
trained specialist personnel who have been authorized by the plant operator to do so.
To avoid possible injury to personnel or damage to valve parts, WARNING, CAUTION
and NOTICE should be strictly followed.
Before installing or commissioning, be sure to read and thoroughly understand the
product manual and operate the product properly.
Operators must strictly observe the applicable national regulations with regards to
installation, function tests, repairs, and maintenance of electrical products.
For additional information or if specific problems occur that are not discussed in these
instructions, contact the manufacturer.
The manual can be altered or revised without any prior notice.
Please visit our website (http://www.tissin.co.kr ) check the latest documentation.
Manual version
PM-TS600EN-12/2020
