11
Table 10
contains description of switch
SW1
The switch
SW1- SW8
–
Switch 1-8
is designed for selection of operation modes and setting of
c
o
nfiguration parameters.
Item Switch name
Purpose
1
SW1
Activation of the boom lift function if it did not reach the lower position during
lowering
2
SW2
Enabling the boom slow function at the end of the movement
3
SW3
Duration of deceleration when lifting 1 or 2 seconds
4
SW4
Deceleration time when lowering 1 or 2 seconds
5
SW5
If the switch is in the
OFF
position
TRAFFIC_LIGHT_TOP_OUT_1
and
TRAFFIC_LIGHT_TOP_OUT_2
- show that
the road blocker in the
TOP
position.
If the switch is in the
ON
position
TRAFFIC_LIGHT_TOP_OUT_1
and
TRAFFIC_LIGHT_TOP_OUT_2
- show that
the road blocker is not in the
BOTOM
position.
Thus to
TRAFFIC_LIGHT_BOT_OUT
it is possible to connect a
green
traffic light
lamp, and
to TRAFFIC_LIGHT_TOP_OUT
- to
red
.
6
SW6
Not applicable
7
SW7
Type of response on signals of
inputs of protective sensors
–
induction
loops or safety photocells
25, 26, 55, 56 "INP Safety"
.
When the switch is
OFF
, then road blocker will be stopped when signal is
coming on
INP Safety.
When the switch is
ON
, then road blocker will be lowering when signal is
coming on
INP Safety.
8
SW8
Not applicable
Table 11
contains description of indicators
LED1-LED8
The indicators
LED1-LED8
are designed to display the Road blocker operation modes and
configuration parameters.
Item Indicator name
Purpose
1
LED1
It is lit when there is no contact with wire remote control panel
RB111
.
It is not lit when wire remote control panel is connected and operates properly.
2
LED2
It is lit when there is no contact between angular position sensors
DI-601
and
address
1
(road blocker 1).
It is not lit when
DI-601
of the Road blocker
1
is connected and operates
properly.
3
LED3
It is lit when there is no contact between angular position sensors
DI-601
and
address
2
(road blocker 2).
It is not lit when
DI-601
of the Road blocker
2
is connected and operates
properly.
4
LED4
Not applicable
5
LED5
Not applicable
6
LED6
Not applicable
7
LED7
Displays position of the switch
SW7
8
LED8
Not applicable
