Tisira TOC919 User Manual Download Page 13

Maintaining your Oven

GENERAL MAINTENANCE

Ensure that the power to the unit is switched off prior to cleaning the unit. Surface should only 
be cleaned with warm soapy water and a soft non abrasive cloth. In coastal environments and 
humid areas more frequent cleaning is required to maintain the finish.

To extend the life of your oven, it must be cleaned frequently, keeping in mind that:

•   Do not use steam equipment to clean the appliance.
•   To protect against the risk of electrical shock, do not immerse the unit, cord or plug in water 

or other liquid or sprinkle water to clean the appliance!

•   Don’t clean the appliance when it is hot! The inside and external surface of the oven should 

preferably be cleaned by damp cloth when it is cooled down. Wash all accessories in hot 
soapy water, wipe dry with a paper or cloth towel.

•   If you use your oven for an extended period of time, condensation may form. Dry it using a 

soft cloth.

•   There is a rubber seal surrounding the oven opening, which guarantees its perfect 

functioning. Check the condition of this seal on a regular basis. If necessary, clean it and avoid 
using abrasive products or objects to do so. Should it become damaged, please contact your 
nearest service centre. We recommend you avoid using the oven until it has been repaired.

•   Never line the oven bottom with aluminum foil, as the consequent accumulation of heat 

could compromise the cooking and even damage the enamel.

•   Clean the glass door using damp cloth and dry it with a soft cloth.
•   Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since 

they can scratch the surface, which may result in shattering of the glass.

DOOR REMOVAL

Your oven is fitted with a removable door. To
remove the door open the door fully, engage
the doorstop [B] on the left and right hinge.
[A] Carefully start to close the door, the door
will start to release from the hinge supports
the door can be then removed. When 
reinstalling the door ensure the hinges are
slid into their slots (C) fully engages in the
base of the hinge support.

Electric Oven 

User Manual

Page

 13

A

C

B

A

C

B

Summary of Contents for TOC919

















Reviews: