3 Button Digital Timer
The operation of this timer is done using 3 buttons. The functions of the buttons are:
With this arrangement it is possible to select the following four functions:
• Minute minder • Operation period
• Operation stop • Time-of-day
These modes can be selected by repeatedly pressing the mode button. The desired time for
minute minder, operation period, operation stop or time-of-day can be set with the “+” and
“-“ buttons.
Time of day
When connected to mains supply the display shows 12.00 o’clock and the LED L4 flashes. As
long as it is flashing, it is possible to adjust the time via the plus and minus buttons. Once the
time is adjusted, it is stored approx. 5 seconds after the last operation, the LED L4 goes dark
again. It is possible to adjust the time-of-day by pressing the mode button until L4 flashes,
then the time-of-day can be adjusted.
Minute minder (interval time)
In order to set the interval time, the “Mode” button has to be pressed repeatedly until LED L3
is flashing. Then the interval time can be set between 0.01 and 2.30 h by using the plus and
minus buttons. After setting the interval time, it remains displayed and the LED L3 is now
illuminated steadily. After the interval time has run down, the alarm signal sounds (2 beeps
every 2 seconds) and the LED L3 is flashing again. Pressing any of the buttons stops the signal
and the flashing, the LED goes dark and the display reverts to the time-of-day. If the alarm is not
stopped manually, it terminates automatically after 2 minutes. The minute minder can be
applied at any time while other functions are operative.
MINUTE
COUNTER
COOKING
TIME
END
TIME
MODE
SUBTRACT
TIME
ADD
TIME
TIME
M
M
L1
L2
L3
L4
Electric Oven
User Manual
Page
11
