TIPTEL Ergophone 6050, Operating Instructions Manual

Page: 12 / 52

Initial use
12
Put the telephone into the charger to charge the battery. The right-hand
bar segment in the charge status display flashes during the charge pro-
cess. All of the segments in the display are filled when the charge process
is complete. The charge status display no longer flashes.
Note: Instead of charging via the charger, the power supply plug
can also be connected directly to the jack on the underside of
the telephone. The battery can also be charged via a USB
connector on a computer.
Fully charge the battery prior to initial use. To preserve the battery thereaf-
ter, only place the telephone in the charger when the battery is almost flat
(when only 1-2 bars in the charge status display are filled).
You will usually need to recharge the battery about once a week (depend-
ing on the duration of your calls). Battery performance diminishes over
time. If you notice after a time that you need to recharge your telephone
more frequently, replace the battery.