TIPTEL 332 CLIP, Operating Instructions Manual

Page: 11 / 44

Settings
11
Message code ....................... The message code is a 1 to 4 digit number ranging
from 0 to 9999. The code “–” is used to turn the
message function off.
Exchange identification ........
code
Here, you enter the identification code (only for tele-
phone systems) to access the public exchange (e. g.
0). This number will then always be dialled auto-
matically before the telephone number. The code “–”
is used to turn this function off.
Display contrast .................... 15 levels are available to set the display contrast.
Destination phone number .. Here, you enter the phone number for the message
transfer (for example your mobile number). A set
number can be deleted by pressing the selection
button next to “X”.
Factory pre-set ...................... Provided that you confirm the corresponding
question with “yes”, the device will resume the
factory pre-set parameters and all incoming
messages and settings will be deleted.
Set-up menu
+
Press Stop and Answering mode at
the same time. The display shows the set-up menu.
Use the arrow buttons (up/down) to
view the available setting para-
meters.
The display shows all available setting
parameters.
Press the selection button next to
the setting to be changed until the
desired setting option is being
displayed. The display shows the current setting.
or