Tiptel 31XX IP Phone Configuration Guide
8/10
4. Auto Provisioning
The easiest way to set up a Tiptel 31xx phone for MyPBX is to use the built-in plug
and play provisioning functionality inside MyPBX. This will allow the phone to
configure itself by retrieving a generated phone configuration file.
Step1.
Plug your Tiptel 31xx phone into your LAN. (The Phone must be on the same
LAN as that of MyPBX IP PBX).
Step2.
Check if PNP is enabled in IP phone side. Click
“Service”
“Auto
Provisioning” to check the details. Auto-Provisioning via PNP is activated by default in
Tiptel 31xx phones.
Figure 3-1
Step2.
Check the MAC address of your Tiptel 31xx IP Phone on status page (or press
Ok key at phone keypad).
Figure 3-2
