TIPTEL 1/8 fax clip, Operating Instructions Manual, Page: 17 / 72

An external call can be placed on hold. This hold function enables you to make an enquiry in the
room, or to call another internal number. Your telephone partners cannot hear the enquiry. They
will hear music on hold.
Note: - The hold function is dependent on the dialling mode of your telephone.
- The hold function can only be used 12 seconds after the last number was dialled.
- If you replace the handset during the hold function your extension will ring for
45 seconds as a reminder that someone is waiting on hold. If the external call is not
retrived during this time, then the call will be disconnected.
Pulse dialling
Tone dialling
17
Placing a call on hold to make enquiries
1. Dial 1 .
2. To retrieve the external call dial 1
again.
The external call is placed on hold.
You hear the telephone system’s dial tone.
Make your inquiry in the room or make an
internal call.
The extension is reconnected to the exter-
nal call.
1. Press the RECALL button.
2. To retrieve the external call press
the RECALL button again.
The external call is placed on hold.
You hear the telephone system’s dial tone.
Make your enquiry in the room or make an
internal call.
The extension is reconnected to the exter-
nal call.