E
N
G
L
I
S
H
10
Quick Start Guide Rev. 12/19
5. Flip Up Sights (option)
The Front Flip Up Sight and the Rear Flip Up Sight can be in two positions. When flat against
the Picatinny Rail, you can press the T (large arrow) or press the two tabs located on the sides
of the sight (small arrow) to make them flip up for use.
Adjusting the Front Sight
1. The front sight is adjustable for elevation by moving the
pin to lower or raise the point of impact
2. To adjust the front sight for elevation, turn the knob (arrow
at right) left or right to move the point of impact up or down.
Adjusting the Rear Sight
1. To adjust windage it is necessary to move the rear sight
aperture left or right by using the knobs (black arrow) on
the sides of the rear sight.
2. Turning the left windage adjustment knob
counterclockwise moves the point of impact to the
right.
3. Turning the left windage adjustment knob
clockwise moves the point of impact to the left.
Unloading Your Marker
1. Eye protection designed for paintball use must be worn by the user and any person
within range. The Trigger Safety must be in Safe mode and the barrel blocking device
must be installed.
2. Empty all paintballs from the Hopper or remove the Magazine from the marker.
3. Using the included hex key, loosen the Hopper Bolt and remove the Hopper from the
Feed Elbow.
4. Go to a designated firing area, remove the barrel blocking device, and move the Trigger
Safety to Fire mode (see page 6).
5. Point your marker in a safe direction and fire several times to be sure there are no
remaining paintballs lodged in the chamber or barrel. IMPORTANT: Do not uncock your
marker as uncocking your marker may push a ball into the chamber or down into the
barrel in which case the ball will be hidden from view.
Front Sight
Rear Sight
Down
Up
Right
Left
