Tippmann Alpha black ELITE, Owner'S Manual

Page: 4 / 64

4
E
N
G
L
I
S
H
WARNING
Always keep the barrel blocking device installed except
when your marker is in use. Always make sure that the
Trigger Safety is in the Safe mode (see instructions on
page 6) and the barrel blocking device is properly installed
on your marker according to the instructions to prevent
damage to property, serious injury, or death.
Barrel Blocking Device Installation Instructions
1. Place the barrel blocking
device onto the Barrel,
loop the cord over the
top of the receiver, and
position at the back of the
grip as shown.
2. Adjust the cord length
retainer up to the back
of the grip by pulling the
cord through it until the retainer is snug against the back of
the grip. Keeping the cord as tight as possible, leave just
enough cord elasticity to pull the cord/retainer up over the
top of the marker to remove the barrel blocking device for
firing.
3. After the cord length is properly adjusted, lock the cord
length by tying a knot in the cord against the back of the
retainer as shown.
4. Before and after playing, inspect the barrel blocking device. Replace the barrel blocking
device if the device or cord is damaged, or there is a loss of cord elasticity.
5. Clean the barrel blocking device with plain, warm water and store out of sunlight in a dry
area when not in use.
WARNING
This is not a toy. Misuse may cause serious injury or
death. Eye, face, and ear protection designed for paintball
must be worn by the user and any person within range.
We recommend you be at least 18 years old to purchase.
Persons under 18 must have adult supervision when
using this product. Read the Owner’s Manual before using
this product.
C
ord
L
ength
r
etainer
B
arreL
B
LoCking
d
eviCe