Motz-Computer Copyright
2011
Service und Vertriebs GmbH
Pfennigbreite 20 - 22 Seite: 18
D-37671 Höxter
Germany
If the red light switches on, it indicates that something is wrong with the electronic ring. Please put
the ring again into the whole of the basketing unit. If the red light switches on again you have to
replace this ring by a new one, because it’s defective.
red light on
DEFECTIVE RING
Allocation during basketing procedure
As you know from some older TIPES control unit versions you are able to allocate a pigeon during
basketing without a pc connected. Every version of the MC1100 clock has implemented that function
as a standard. This function should be used in case of emergency when a pigeon ring get defective.
For successful allocation the ring number of the pigeon must be a member of the already uploaded
allocation table.
In basketing mode the system automatically recognize a not allocated electronic ring, when you put it
on the basketing unit.
Press the ENTER key if you want to allocate the registrated electronic ring to a pigeon. If not press
the ‘C’ key and the allocation procedure will be cancelled.
To select the pigeon you want to allocate, happens in two ways:
1.
Move the selection bar with the up and down key to the pigeon
2.
Press the right arrow key and input the last 4 digit of the association ring number
Moving the selection bar to select pigeon
association ring number
New York 06. 18:06:21
New York 06. 18:06:21
3/3:
AU02-YORK230001BLUEc
07/06/02 18:06:21
Allocate ?
AU02-YORK230001BLUEc
AU01-YORK241234GREYh
AU00-YORK230012BLUEc
AU02-YORK230312BLUEh
