4. Adding the Electrolyte Solution
**CAUTION** The electrolyte is highly caustic and should always be handled using
protective equipment such as rubber gloves and safety glasses or goggles, and protective
clothing. When handling the electrolyte solution, be careful not to spill any. The electrolyte
may damage any finished surfaces, clothing, etc. Electrolyte is highly corrosive to many
metals, including copper, brass, zinc and aluminum, and reacts violently with acids.
Electrolyte destroys human tissue on contact. It is odorless and colorless. Please refer to the
Material Safety Data Sheet at the end of this manual for more specific health and safety
information.
1.
Put on safety glasses, gloves and protective clothing.
2.
Move, or cover up anything that may be damaged by spilled electrolyte.
3.
Check the drain plug in the side of the unit to make sure the plug is tight.
4.
Unscrew the cap from the electrolyte chamber (the small cap).
5.
Using a plastic funnel, slowly pour the solution into the
DISTILLED WATER
CHAMBER
.
6.
Carefully wipe up any electrolyte spills with a clean paper towel.
7.
Pour the entire bottle of electrolyte into the
DISTILLED WATER
CHAMBER
.
8.
After filling the chamber, rinse the funnel with clean water and dry.
9.
Do not use the funnel for any other application. Store the funnel for future use.
10.
Rinse the electrolyte bottle in clean water. Replace cap and dispose in garbage. DO NOT REUSE ELECTROLYTE
BOTTLE!
11.
Replace the stainless steel cap on the
DISTILLED WATER
CHAMBER
. Tighten until snug. Do not overtighten.
