TIP 30310, Translation Of Original Operating Instructions

Page: 17 / 52

3
5. Scope of delivery and optional accessories
This product includes:
A sand filter tank including base plate, 4-way valve, one pump, two bags with connection and installation accesso-
ries (see chapter 6 "Installation"), an instruction manual.
Check the contents for completeness. If possible, keep the packaging until the end of the warranty period. Dis-
pose of packaging materials in an environmentally sound manner.
Depending on the application, additional accessories may be required. In our pool range, you will find other useful
accessories that simplify installation, improve maintenance and pool-cleaning; e.g. Pool solar cover Ø 3.6 m (item
No. 30450), Pool solar cover Ø 4.6 m (item No. 30451), Pool UV-C Unit 36 Watt (item No. 30447), "ChlorMax"
(item No. 30311), Connectors Ø 32 mm (item No. 30966), Connectors Ø 38 mm (item No. 30967).
6. Installation
6.1. General Installation Instructions
During the entire process of installation, the device must not be connected to the electrical
mains.
The pump and the entire port system must be protected against frost.
All connection lines have to be perfectly tight since leaking lines may affect the performance of the pump and
cause considerable damage. If required, please use a suitable sealant to make the installation airtight.
Avoid when tightening screw excessive force that may cause damage.
When laying the connection pipes, you should make sure that the pump is not exposed to any form of weight, vi-
bration or tension. Moreover, the connection lines must not contain any kinks or an adverse slope.
Please observe the illustrations, too, which are contained as an attachment at the end of the present operating in-
structions. The numeric and other details included in brackets below refer to these illustrations.
Please observe the graphic figures in this manual. The numbers and other indications in brackets refer to the fol-
lowing graphic figures in this text.
6.2. Installation of sand filter
1. Mount the pump on the base plate as below picture (fig. 1)
fig. 1
15