TIP TIG - TIG 500 COMPACT, OPERATING MANUAL
Page 33 of 58
6.3.4
Spool brake setting
Safety
General Information
After releasing the torch trigger the wire spool must stop unreeling. If it continues unreeling,
readjust the brake.
Setting the brake
-
Tighten the Allen screw (8 mm) in the clockwise direction to increase the braking effect.
CAUTION
Risk of injury and material damage from the welding current and accidental ignition of an arc.
Before starting work, disconnect the ground earth connection between the welding system and
the workpiece.
CAUTION
Risk of injury and damage from wire electrode emerging. While working:
•
hold the welding torch with the point directed away from the face and body
•
wear suitable protective goggles
•
do not point the welding torch at people
•
make sure that the wire electrode does not touch any conductive or earthed
parts, such as
the housing, etc.
