TIP TIG - TIG 500 COMPACT, OPERATING MANUAL
Page 25 of 58
6.
INSTALLATION AND COMMISSIONING
6.1
Before installation and commissioning
Safety
Utilization for intended purpose
The power source is intended exclusively for TIG and MMA welding. Utilization for any other
purpose, or in any other manner, shall be deemed to be not in accordance with the intended
purpose. The manufacturer shall not be liable for any damage resulting from such improper use.
Proper use also includes:
-
following all the information in the operating instructions
-
carrying out all the specified inspection and servicing work
Ambient conditions
The machine must not be operated in the open air and must only be set up and operated on a
suitable, stable and level base!
-
The operator must ensure that the ground is non-slip and level and provide sufficient lighting
for the place of work.
-
Safe operation of the machine must be guaranteed at all times.
Unusually high quantities of dust, acid, corrosive gases or substances may damage the equipment.
-
Avoid high volumes of smoke, vapor, oil vapor and grinding dust!
-
Avoid ambient air containing salt (sea air)!
In operation
Temperature range of the ambient air:
-
-25 °C to +40 °C
Relative air humidity:
-
Up to 50% at 40 °C
-
Up to 90% at 20 °C
Transport and storage
Storage in an enclosed space, temperature range of the ambient air:
-
-30 °C to +70 °C
Relative air humidity:
-
Up to 90% at 20 °C
WARNING
Incorrect operation or shoddy workmanship can cause serious injury or damage. All work
described in this document must only be carried out by trained and qualified personnel. All
functions described in this document must only be used by trained and qualified personnel.
Do not carry out any of the work or use any of the functions described until you have fully
read and understood the following documents:
•
this document
•
all the operating instructions for the system components, especially the safe
ty rules
