Tion Breezer Lite, User Manual, Page: 9 / 44

9
Controls
Operation modes
Standby — the device damper is closed, the fan does not operate, and there is one yellow
indicator light on the front panel.
Operation — the device damper is open, the fan operates at a speed set by the user, and
there are 1–3 blue indicator lights on the front panel depending on the speed set.
Pairing — for connecting the device to a smartphone or remote control. The device
shutter is closed, the fan does not operate and there is one blinking blue indicator light.
The device will enter Standby mode once paired with the remote control (or after one
minute if the pairing fails).
Warning — the device damper is closed, the fan does not operate, and there is one
blinking yellow indicator light on the front panel. The device will automatically enter
Standby mode once external conditions match the operating conditions.
Error — the device damper is closed, the fan does not operate, there are three red
indicator lights. Please refer to the Troubleshooting section of this document when
enabling this mode.
Buttons
Initial mode Step Result
Standby
Hold for 3 seconds or less
Switch to Operation mode
Operation
Hold for 3 seconds or less
Switch to Standby mode
Operation
Hold down the buttons for at least 1
second
Turn on speeds. 2, 4, 6
Operation
Hold down the buttons for at least 1
second
Heating temperature, °С: +10, +20,
+25, 0
Standby
Hold for 3 seconds or less
Switch to Pairing mode
Operation
Hold down the and buttons for at
least 3 seconds.
Filter life meter reset
Standby
Hold down the and buttons for at
least 3 seconds
Reset the device to factory settings
Disconnected
from power
supply
Connect the device to the power supply
while holding down the and buttons
Clear the list of paired devices
Use the Tion Remote mobile app or a remote for greater control over device parameters.