Tion Breezer Lite, User Manual, Page: 12 / 44

12
Troubleshooting
Code Description Solution
СС01
Intake air temperature is higher than
permitted
Wait until the ambient conditions match
the operating conditions of the device
СС02
Intake air temperature is lower than
permitted
СС03
The temperature of the control board
exceeds the permitted value Disconnect the device from the power
supply for 10–15 seconds (unplug the
power cord from the outlet) and then
reconnect it
If this does not resolve the issue, please
make note of the error code and contact
Tion Smart Microclimate Customer
Service or your nearest authorized
service center
СС04
The temperature of the control board is
lower than the permitted value
EC01, EC02,
EC03
Damper operation error
Write down the error code
Disconnect the device from the power
supply for 10–15 seconds (unplug the
power cord from the outlet) and then
reconnect it
EC04, EC05,
EC06, EC11
Heater operation error
EC07, EC08,
EC09, EC10
Temperature measurement error
If you cannot resolve the issue yourself, please contact the Tion Smart
microclimate, JSC service department or the nearest authorized service center.
Device serial number locations
Warranty card Device