TIOKRAFT VL20 User Manual
©
Krasnoye Pole LLC, 2020
12. INSTALLATION INSTRUCTIONS
The device is designed for wall mounted installation as this allows to optimize long term air
purification efficiency. Ideally the device should be switched on once and left alone until
servicing or maintenance is required. If wall mounting is impossible for any reason, please use
the desktop stand supplied with the device.
Step 1. Select installation location
At least 1m away from direct heat sources;
•
Ensure that nothing will obstruct air vents at bottom and top of device after installation;
•
Rigid wall without vibration.
Step 2. Wall hole drilling
Determine the wall hole position using the provide TIOKRAFT VL20 wall mount as a template.
•
Drill one hole about 4-5cm deep;
•
Insert an appropriate dowel into the hole;
•
Securely screw in a screw, taking care to leave about 5mm of the screw head outside of
wall;
•
Hang the wall mount onto the screw and attach the device to it.
13. RECYCLING AND DISPOSAL
The product must be disposed of in accordance with the requirements of SanPiN 2.1.7.2790-10
"Sanitary and epidemiological requirements for the management of medical waste" (Class A) or
similar.
14. WARRANTY
This product has been designed, manufactured, tested and packaged using maximum care.
The manufacturer guarantees the proper functioning of this device throughout its useful life.
The warranty period covering faulty parts and materials is 24 months from the date of
purchase, provided the device has been operated and stored correctly in accordance with this
User Manual.
The manufacturer shall not be held liable for product failure or damage in the
following cases:
•
careless storage, handling and transportation by the user or any third party;
•
unauthorized modifications, maintenance or repairs;
•
connecting the device to an improper power supply (wrong voltage) or a power supply
with electric current fluctuations in excess of the values specified in this datasheet;
•
as a result of erroneous or deliberate actions;
•
tampering with the device in any way not explicitly mentioned in the User Manual or in
order to change the way it was intended to function;
•
force majeure events (fire, natural disasters, etc.);
•
introduction of any object or liquid not intended to be inside of the device;
•
deliberate mechanical damage to the device.
8