tiny TOOLS WRC-4, Installation And Operation Manual, Page: 9 / 18

ee--m maaiill:: support@broadcasttools.com vvooiiccee:: 360.854.9559 ffaaxx:: 866.783.1742
9
WRC-4 Web Based Remote Control
INSTALLATION
Unit Setup Dialog – cont’d
The Unit Setup dialog allows the user to set up operating characteristics of the
WRC-4 firmware and applet.
Site ID Changes the site ID displayed on the main page.
Station Call Letters Changes the station call letters displayed on the main page.
Analog Label Changes the label associated with any of the five analog reg-
isters.
Units Changes the units label associated with any of the five ana-
log registers.
Minimum Sets the numeric value represented by the “zero” value of the
10-bit analog register. For example, if the register represents
a temperature in the range -40 to 190.4, the user would enter
-40 in this field. The applet automatically displays scaled val-
ues on the gauges and numeric representations on the main
screen.
Maximum Sets the numeric value represented by the “1023” value of
the 10-bit analog register. For example, if the register repre-
sents a temperature in the range -40 to 190.4, the user would
enter 190.4 in this field. The applet automatically displays
scaled values on the gauges and numeric representations on
the main screen.
Digital Label Changes the label associated with any of the four digital
inputs.
Relay Label Changes the label displayed on any of the relay buttons.
Collector Label Changes the label displayed on any of the open collector but-
tons.
External URL Label Changes the label displayed on the user-defined button.
External URL Defines the URL that is activated when the user-defined but-
ton is clicked.
OK Saves the information and exits. NOTE: After changing labels
and values, it is necessary to restart the applet to make these
items appear and/or refresh the browser.
Cancel Exit without saving values.