XD 7500
Commissioning
23
ba77191e01 - 71310060
04/2018
3.4.6
Operation with a 12 V vehicle connection cable
With the 12 V vehicle connection cable (item no. 71310020) you can operate
the spectrophotometerXD 7500 on the go and regardless of the local power
supply.
To do so, a 12 V power supply such as a commercial 12 V portable power
source or a 12 V car battery is required.
Safety
For operation with an external battery, follow the safety instructions of the
battery.
Make sure that the power supply unit is suitable for the operation of the spec-
trophotometer (see technical data for the power supply unit and technical
data for the spectrophotometer).
Configure the barcode reader before operation with the pho-
tometer to use code 128 (see operating instructions for your
barcode reader).
Many barcode readers add a LF (Line Feed) or a CR (Car-
riage Return) control character when delivered from the fac-
tory. This setting causes malfunctions on the concentration
menu of the spectrophotometer. In this case, change the set-
ting of your barcode reader so that after the barcode read in,
no suffix is transmitted via the USB interface (see operating
instructions for the barcode reader).
F1
F2
F3
F4
1
2
3
4
5
6
7
8
9
-
0
.
*
GHI
PQRS
ABC
JKL
TUV
DEF
MNO
WXYZ
Esc
START
ENTER
Zero
12 V power supply unit
(e.g. portable power
source or car battery )
12 V vehicle con-
nection cable
XD 7500
