Tintometer 15150001, Instruction Manual

Page: 16 / 176

Commissioning XD 7500
16 ba77191e01 - 71310060 04/2018
tion 5.2 C
LEANING
or Section 6.1 A
CTIONS IN THE CASE OF A BROKEN CELL
).

The cell shaft should always be closed when the photometer is not used.

For the instrument to be transported the cell shaft has to be empty.

For mobile use, we recommend the transport case (item no. 71310010,
see Section 8.1 A
CCESSORIES
).
3.3 Initial commissioning
Perform the following activities:

Insert the buffer batteries (see Section 3.3.1)

Connect the power supply (see Section 3.3.2)

Switch on the photometer (see Section 3.3.3)

Set the language (see Section 3.3.4)

Set the date and time (see Section 3.3.5)

Carry out a zero adjustment (see Section )
3.3.1 Inserting the buffer batteries
Four buffer batteries (type AA or Mignon, included in the scope of delivery)
supply the integrated clock with power while the photometer is switched off.
Insert the batteries as follows:
If you set the language, date and time using sections 3.3.4 and
3.3.5, you will soon become acquainted with the easy operation
of the XD 7500. More detailed instructions on operation are given
in Section 4.2 G
ENERAL OPERATING PRINCIPLES
.
1
Turn the photometer upside down
and place it on a soft surface.
2
Open the lid of the battery com-
partment (1).
3
Insert the four batteries in the bat-
tery compartment. Make sure that
the poles of the batteries are in the
correct position.
4
Close the lid of the battery com-
partment.
1