Tina Richards tua spa, Handbook

Page: 10 / 23

Intensity
level Button setting LED Treatment/ Skin type
1 Automatic
when set to
MICRO mode
Green LED flashing
slowly
Micro-current Stimulation for
sensitive skin and beginner’s
treatment.
2 Press once
after the 2 quick
beeps
Green LED flashing at
medium speed Micro-current Stimulation for
normal to sensitive skin and
intermediate treatment.
3 Press twice
after the 2 quick
beeps
Green LED flashing
quickly Micro-current Stimulation for
normal skin and advanced
treatment.
S O N I C
M I C R O
BATTERY
18 • SELECTING PERFORMANCE MODES: MICRO SELECTING PERFORMANCE MODES: MICRO • 19
MICRO
The
MICRO
mode has 3 Intensity Levels: 1, 2 and 3.
Press the button down for at least 3 seconds until you hear a beep
confi rming that the device is switched on and is in SONIC mode
(automatic).
Press the button again promptly for
MICRO
mode. The Green LED
will light up and fl ash slowly.
Wait 5 seconds until you hear 2 quick beeps and the device will
automatically start at
Intensity Level 1 .
To select the other intensity levels:
After the 2 quick beeps (in
MICRO
mode) –
Press the button once for
Intensity Level 2
. The Green LED will fl ash at medium
speed.
Press the button twice for
Intensity Level 3
. The Green LED will fl ash quickly.
You can increase the Intensity Level at any time during the Micro-current
Stimulation treatment by pressing the button up to Level 2 or Level 3, or press it
again to go back to Level 1.
MICRO Mode Summary Table
The MICRO mode levels have a maximum duration of 12 minutes. The end of
the treatment is signalled by a long beep after which Tua Spa switches off auto-
matically.
We recommend 3 to 12 minutes for each Micro-current Stimulation treatment,
after which you can switch off Tua Spa by pressing the button down for about 3
seconds.