Timpdon Electronics
Tel 0161 - 980 7804
Issue 2 – October 2010
Web
www.timpdon.co.uk
EMail [email protected]
Features
•
Controlled motion between two servo positions with a single switch, using a
standard RC servo.
•
Fully user programmable for independent servo end positions, rotation
speed and end of travel bounce. Programmed settings retained when power
removed.
•
Sense output at end of throw, in both directions – permits daisy chaining of
units with sequential operation, or external indication of servo position.
•
Ideal for control of crossing gates, points and semaphore signals.
•
Digital microprocessor controlled.
•
Small size – 50mm x 25mm x 16mm.
•
4.8 V to 6 V d.c. supply.
•
Screw terminals for connections to supply, control switch and sense output.
3 pin plug for direct servo connection.
Timpdon
Electronics
ServoSwitch
Model
SCS2
