Hand Control Programming- TDH6PR
Version 3 August 2021
9 of 10
9
8.
Restore Factory Setting
(1)
Refer to Chapter 2-Reset: after the “beep” sound, press
and
buttons together for 15 seconds, the
control box will twice make a “beep” sound, and the digital display will show “---. “
(2)
The settings below will restore to the original factory settings:
Memorized position
Desk starting height
Upper and lower height limit
T-touch or TCS1 sensitivity
9.
Error Codes
The digital display shows the error codes below to suggest the issues that users may encounter during the
operation.
(Note 4)
Error code
Descriptions
000
Resetting
E00
Not reset completely
E01
Overuse protection
E02
Unbalance protection
E03
Anti-collision
E04
T-touch Protection
E11
M1 Motor over-current protection
E12
M2 Motor over-current protection
E13
M3 Motor over-current protection
E21
No Hall sensor from M1
E22
No Hall sensor from M2
E23
No Hall sensor from M3
E31
No current from M1
E32
No current from M2
E33
No current from M3
Note 4: Some control boxes may not support this function.
