Hand Control Programming-TDH3
Version 3 August 2021
6 of 10
6
3.
Adjusting the Height
Press
+
or
-
button until the desk reaches the preferred height.
4.
Setting the Memorized Position
TDH3 supports a maximum of 3 memory positions.
How to memorize a position:
1.
Adjust the desk to the desired height.
2.
Press S button for 3 seconds, the display will flash. Then, press the memory button 1, 2 or 3 you’d like to
save.
3.
Press (and hold) button 1, 2 or 3 to move the desk to the memorized position.
(Note 1)
Note 1: It depends on the control box setting whether or not the memory button needs to be held.
