• The relative humidity should be maintained below 60 percent
and the surfaces should be dry.
• The storage area should be kept free from airborne
contaminants such as, but not limited to, dust, dirt, harmful
vapors, etc.
• The storage area should be isolated from undue vibration.
• Extreme conditions of any kind should be avoided.
Due to the fact that Timken is not familiar with your particular storage
conditions, we strongly suggest following these guidelines. However,
you may be required by circumstances or applicable government
requirements to adhere to stricter storage requirements.
Most bearing components typically ship protected with a corrosion-
preventive compound that is not a lubricant. These components
may be used in oil-lubricated applications without removal of the
corrosion-preventive compound. When using some specialized
grease lubrications, we advise you to remove the corrosion-
preventive compound before packing the bearing components with
suitable grease.
Graphical Representation Of Typical Cone Bore Lifting Fixture.
NOTE:
Please contact your Timken representative for additional details and availability
of bearing assembly specific lifting fixtures.
Fig. 4
Fig. 5
www.timken.com
The Timken team applies their know-how to improve the reliability and performance of machinery in diverse
markets worldwide. The company designs, makes and markets high-performance steel as well as mechanical
components, including bearings, gears, chain and related mechanical power transmission products and services.
07-15: 29 Order No. 10463
|
Timken
®
is a registered trademark of The T
imken Company
.
|
© 2015 The T
imken Company
|
Printed in U.S.A.
