background image

Timex Audio Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product 
to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date 
of original purchase.
Should service be required by reason of any defect or malfunction during the warranty period, SDI Technologies will repair 
or,  at  its  discretion,  replace  this  product  without  charge  (except  for  a  $5.00  charge  for  handling,  packing,  return 
UPS/postage, and insurance). This decision is subject to verification of the defect or malfunction upon delivery of this product 
to the Factory Service Center listed below. The product must include proof of purchase, including date of purchase. The fee 
for service after the warranty period or without proof of purchase is $15.00.
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or 
defective batteries are the most common cause of problems encountered.
If service is still required:
1.  Remove batteries (if applicable) and pack the unit in a well-padded, heavy corrugated box.
2.  Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase.
3.  Enclose a check or money order payable to the order of SDI Technologies, Inc. for the sum of $5.00 (or $15.00 if after 

the warranty period or without proof of purchase).

4.  Send the unit prepaid to the Factory Service Center listed below:

Consumer Repair Department

SDI Technologies Inc.

Timex Audio Products Division

1330 Goodyear Drive

El Paso TX 79936-6420

NOTE: 

This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) 

products  which  have  been  damaged  by  negligence,  misuse  or  accident,  or  which  have  been  modified  or  repaired  by 
unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to tape cassettes (if 
applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product subsequent to the 
original purchaser. Any applicable implied warranties are also limited to 90 days, and SDI Technologies will not be liable for 
consequential damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, 
so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights 
which vary from state to state.
 

© 2009 SDI Technologies, Inc. All rights reserved

TIMEX is a registered trademark of Timex Corporation the United States and other countries

T736-122909-A   

 

 

 

 

 

 

 

 

Printed in China

Limited 90-Day Warranty Information

14

P18

Summary of Contents for T736


















Reviews: