background image

Radio And Buzzer Operation

You may set one alarm for wake to RADIO and the other for wake to BUZZER. Just set the ALARM 1 and ALARM 2 Selector 

Controls to the desired positions.

Snooze Control

After the alarm turns on in the morning you may press the 

Snooze button

 to stop the alarm for 9 minutes. After 9 minutes 

the alarm turns on again.
The Snooze operation may be repeated several times within one hour of the original alarm time. But after one hour the alarm 

will not turn on again.
During Snooze operation the appropriate Alarm indicator flashes in the display.

Sleep To Music or Soothing Sounds Timer

You can program the Sleep Timer to play the radio or soothing sounds from 1 minute up to 99 minutes and then shut off 

automatically. The factory default sleep timer setting is 60 minutes.

1.  Press the 

SLEEP button

. The display will briefly show “60” and the radio or selected sound 

will begin to play. After 60 minutes the radio will shut off automatically. Each time you press the 

SLEEP button

 the sleep timer will start at 60 minutes. This is the initial sleep timer default 

setting.

2.  To increase or decrease the amount of time that the radio will play before shutting off, hold the 

Sleep button

 for 3 

seconds until a “0” begins flashing in the display, then use the SimpleSet keypad to enter the desired sleep timer setting 

between 1 minute and 99 minutes. When the desired time is showing on the display press the 

ENTER button

 to save 

the new setting. The clock will ‘beep’ twice to confirm that the new setting has been accepted.

Notes:  

•  When you change the sleep timer from the 60-minute default setting to a different setting, the new setting becomes the 

new default setting. Whenever you activate the sleep timer it will begin with your new default setting and count down to 

zero from that point.

•  If you enter an invalid sleep time on the keypad you will hear a long ‘beep’ to warn you that you have entered an invalid 

number. Use the SimpleSet keypad to enter a valid number (1 to 99) and press the 

ENTER button

 again.

3.  To cancel the sleep timer before it counts down to “00” and shut the radio ‘Off’ immediately, press the SNOOZE bar.

IMPORTANT:

Remember that the station and volume settings that you choose for the “Sleep To Music” operation are the same settings 

that you will hear if you set the alarm for wake to radio the following morning.

Display Dimmer Control

You can reduce the display brightness by sliding the 

DIMMER control

 to the Low position. 

10

P14

Summary of Contents for T736


















Reviews: