21
Monitor Mode
In this mode you can view both speed and distance information as you
travel while the GPS receiver is receiving data. Entering this mode
automatically activates the receiver.
A. While in Monitor Mode, press
SPEED/DISTANCE DISPLAY
button to
select SPEED, AVERAGE SPEED, MAXIMUM SPEED, PACE, AVERAGE
PACE, BEST PACE, and GPS BATTERY LEVEL. Current speed, pace and
GPS battery level are available only if receiver is active.
The last choice displayed will be selected and the information will appear in
upper line of Monitor. Main display will show distance traveled.
B. Press
START/STOP
to pause data accumulation.
C. To clear accumulated data, press and hold
SPLIT/RESET/SET
.
D. Press
MODE
to view options for end of countdown (stop, repeat, start
Chrono). Press
START/STOP
to select action.
E. Press
SPLIT/RESET/SET
to save changes and exit SET mode.
F. Press
SPEED/DISTANCE DISPLAY
button to cycle through type of speed
and distance information to be displayed in upper row of Timer.
Timer Operation:
A. Press
START/STOP
to start Timer. Original time or speed and distance
will be shown in upper display, while remaining time will be shown in
main display.
B. Press
START/STOP
to stop Timer. Press again to resume or
SPLIT/RESET/SET
to reset to original setting.
At the conclusion of the timed period, the watch will play alert melody,
INDIGLO
®
will flash, and timer display will appear in any other watch mode
for 10 seconds. The speed or distance information is displayed if watch is
receiving data. Display will then return to original mode and Timer is reset.
Pressing any button during the 10 seconds silences the alert and resets
timer.
When the Timer is running, an hourglass icon will appear on the display in
Time of Day Mode.
20
Summary of Contents for Ironman Triathlon
Page 1: ......
