17
Split or Lap Timing
Note. The Display can show either
Lap or Split time. Press
SPLIT/
RESET/SET
with chrono reset to
choose lap or split display.
A. Press
START/STOP
to begin
timing. During the timing of a lap,
the upper part of the display can
show speed and distance data if
the Transceiver is operating.
B. Press
SPLIT/RESET/SET
to store LAP and SPLIT. The main display
freezes while the watch continues timing the next segment. After 10
seconds the Lap or Split time is again shown in the main display. If the
watch is set to show speed or pace, then the average value for the
current lap is displayed during the hold period and AV appears in the
display.
C. Press
SPLIT/RESET/SET
again to store another lap. With the 50-Lap
model, if you take more than 50 laps the watch will display the lap count
up to 99 laps and store information from the last 50 laps to the watch’s
memory.
D. At any time, press
SPEED/DISTANCE DISPLAY
to cycle though time and
distance information that is displayed in upper line during timing.
E. Press
START/STOP
to end timing. The display will show either final lap
time or final event time.
Chrono Mode (Chronograph or Stopwatch)
The Chronograph (Chrono) will
time events up to 100 hours. It will
store to memory the lap number,
lap time, split time, average speed,
average pace and distance for each
lap taken.
A lap time is the time for a segment
of an event. A split time is the total
time from the beginning of an
event.
Data displayed in CHRONO mode for Average Speed, Maximum Speed,
Average Pace, Best Pace and Distance are based only on information
received since the chrono was started.
You can go to other modes while the Chronograph is running. In the Time
display, a stopwatch symbol will appear on the display to indicate the
Chrono is running.
A. Press
START/STOP
to begin timing.
B. Press
START/STOP
to stop timing.
C. Press
START/STOP
to resume timing OR
D. With Chrono stopped, press and hold
SPLIT/RESET/SET
to reset display
to zero.
16
Summary of Contents for Ironman Triathlon
Page 1: ......
