STARTING THE FITNESS TRACKER SYSTEM
1. To turn on the POD, slide the switch to the ON position.
2. Clip the POD to your waistband or belt. Make sure the
POD is on the hip and parallel to the ground. For best
results, place the POD on the same side of your body as
your watch.
3. To turn the receiver on, press the
ON/OFF
button on the
watch. Make sure you are at least 6 feet away from
other Fitness Tracker users.
4. The wave on the ANTENNA icon
v
blinks while the
watch looks for the POD.
5. ANTENNA icon
V
is shown steady when the POD and
watch are communicating and successfully linked.
NOTE:
Though the Fitness Tracker system has a working
range of about 3 feet (1 meter) from the POD to the watch,
for the most reliable operation, make sure that the watch is
as close to the POD as possible when starting the system.
TIPS:
• As a convenience, when entering any timing or activity
mode, the watch will automatically start looking for the
POD without having to press the
ON/OFF
button on the
watch.
• To turn off the system, press and hold
ON/OFF
on the
watch for 4 seconds. Slide the POD switch to OFF to turn
off the POD.
• To increase battery life, make sure you turn the POD and
watch receiver off when not in use.
5
TIME
Displays the time of day and date
CHRONO
Use the chronograph for timing purposes
RECALL
Use to review previous chronograph timed
events
TIMER
The Countdown Timer is useful for timing
fixed-time events
INT TIMER
The Interval Timer is great for timing fixed
intervals during workouts
ACTIVITY
Use Activity mode to track steps, activity goals
and calories burned
CALIBRATE
Calibrate mode is used to setup the fitness POD
and make it very accurate
ALARM
Three alarms are available to keep you on time
BUTTON FUNCTIONS
When setting, each button has a different function as
indicated above. Display indicates when button changes
function.
4
SET
ON/OFF
STOP/RESET
INDIGLO
®
MODE
START/SPLIT
ON/OFF
T0801-21_W243_NA.qxd 2/29/08 11:54 AM Page 4
